a 100m * 37cm roll of Redback Premium DTF PET film. Frosted on one side.
This premium PET film has:
- plastic base film 75µm (some factories choose thinner base films, such as 60 micrometres, or even as low as 50 or 35 micrometres, to achieve cost savings)
- (base + coating) thickness 80 - 85µm for optimal ink absorption
Produces superior results when used with any decent to high quality DTF powder and decent to high quality DTF ink.
can be hot (instant) or cold peeled
Heat press settings: (130-150 °C, 15-20 sec)or (150-160°C, 8-15 sec) the settings may vary depending on the type of equipment or brand utilized.
Please note:
Use PET film in adequately ventilated, dry environment, with humidity between 45-60%.
It should be resealed when you are not using it.
Please note: Use PET film in an adequately ventilated, dry environment
- your work place humidtity between (45-50)
- printhead aread between 80-90%.
It should be resealed when you are not using it.
DTF 37cm * 100m PET film - single side frosted; instant peel
This premium PET film has been formulated for optimal absorption of DTF ink and will peel without problems, leaning stunningly vivid and durable DTF transfers.
The film is not tightly rolled, so please don't tilt whilst holding in one hand as the inner layers may shift sideways. This superior quality film will give you excellent results. Please do not store in sunlight, nor in a humid environment.